Commercial Catalog

• Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
• Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
• Weather Stripping for Dust and Water Resistant Compartment Interiors
• Rain Gutters Above all Doors
• Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
• All Compartment Doors are Double Paneled
• Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
• Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
• Bright Tread Aluminum Diamond Plate Overlays on Top Lids
• Bright Tread Aluminum Front Gravel Guards and Splash Guards
• Lock-in-place Shelving, Adjustable on 2” Centers
• 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
• 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
• Composite Fender Flares
• Zinc-plated Hinge Rods with Hinge Blocks
• Lighting Package Installed on Bumper Kick-plate
• 8” Rear Step Bumper
• Removable Trays
• Tie Downs in Bed Area
• Fortress 5-Point Locking System with Zinc Plated Lock Rods
• 1900 Emulsion Undercoating

Touting cargo space matched only by a flatbed, boxes above and below deck, portable trays in the flip-top compartments of the top boxes, and a heavy-duty over-cab ladder rack that is forklift loadable; the contractor body sets the bar high when it comes to versatility. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements. Fold-down gates make it easy to load the bed area without being inconvenienced with loose gates.

The ladder rack comes with Snap-Loc standard on the side rails and heavy-duty rope hooks on rack legs, while the top boxes have D-ring tie-downs on the rear, providing multiple tie-down points to secure loads in the bed and on the rack. With space to secure welders, compressors, generators, or lawn equipment with room to spare; the contractor body is perfect for any number of vocations.

Standard Features

• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Rope Hooks on Cross-members before & aft of rear wheels
• Mud Flaps w/ Anti-sail brackets
• Heavy-Duty Dock bumper
• Powder-coated frame

Landscape Dump Body Standard Equipment
• 42” high Solid Plywood Gates with Wood Uprights on Landscape Dump Body
• Double-acting Hoist raises and lowers the Dump Bed
• Steel Upright Posts and Framing on Rear Hinged Gates
• Heavy Duty Drop Rod Lock on Rear Gates
• Rear Hinged Gates allow easy access to bed area
• Expanded Metal Cab Shield
• Royal Mud flaps

With a 3' Work platform in place of the rear compartment, the Royal combo service body transforms a regular service body into a mobile work station. With removable gates and a variety of options, this body is perfect for the craftsmen who need ample storage and workspace. Rain gutters above and weather stripping inside all doors ensure tools and equipment stay protected from the elements while Ignition key coded, Fortress 5-point locking compartments and internal master lock as an option, provides unprecedented security.

Portable trays in top lids and ergonomic D-shaped handles are highlights of a body engineered with productivity and ease of use in mind. With a heavy-duty, forklift loadable over-cab ladder rack, bamboo slats with stainless-steel posts for the rear platform, and heavy-duty dock bumper as standard features; the Royal combo service body comes equipped to tackle just about any demands.

The last things you need are surprises and expensive add-ons. You have no patience for nickel-and-diming, just like your customers. So Royal Truck Body gives you more standard features than any other service body builder. The kind of commonsense value that respects your hard work and tight margins.

The versatile Royal Stake Bed Body is tough and built with 11 gauge steel cross members on 16” centers for added strength. Easily lift and remove the individual Apitong® panels for loading and unloading. Apitong® has been the traditional wood of choice for flatbed truck flooring where product weight, durability, strength and value are the major concerns.

Standard Stake Bed Features:
• 42” High, 50/50 punched-steel headboard
• 7” High-profile 10 GA. Side rails w/ Internal stake pockets
• Recessed fuel Pocket
• 4” 11 GA. Cross-members on 16” centers
• Three self-tapping screws on wood at each cross member
• Rope Hooks on Cross-members before & aft of rear wheels
• Heavy-Duty dock bumper
• Powder-coated frame
• Apitong® hardwood tongue and groove floor
• Under-bed rope hooks
• 50/50 bulkhead with 14 gauge galvanealed perforated steel top section and solid steel bottom
• Legal light package and reflectors
• Frame construction is 2” x 3” steel tubing
• Mud flaps with Anti-Sail Brackets
• 42” high solid plywood gates with hardwood uprights and grab handles
• 3 year/36,000 mile limited warranty

The CROWN Service Body, with features comparable to most other manufacturers but built with Scelzi craftsmanship and legendary attention to detail.

• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• All bodies equipped with a 6-inch step bumper, powder coated grey
• Stainless steel tubing around wheel well openings

The Signature Series is our Premium line of truck bodies, with upgraded styling and construction materials.

• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• All bodies equipped with a 6-inch step bumper, powder coated gray
• Stainless steel tubing around wheel well openings

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

• Standard body is painted white
• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• Super Contractor bodies have additional storage options
• Stainless steel tubing around wheel well openings
• Floor and side racks can be constructed of aluminum or wood
• All Contractor bodies can be ordered with a standard or fork lift accessible material rack

Scelzi Contractor Flatbed Bodies are the perfect choice as work trucks for building work sites. The Super Contractor features an added top toolbox for extra storage.

All Scelzi Contractor flatbed bodies share certain features and traits, including:

• Standard body is painted white
• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• Super Contractor bodies have additional storage options
• Stainless steel tubing around wheel well openings
• Floor and side racks can be constructed of aluminum or wood
• All Contractor bodies can be ordered with a standard or fork lift accessible material rack

The DuraMag® Service Body is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning. The general body construction is fully welded—never riveted or screwed together. Our proprietary door extrusions, coupled with compression latches and automotive bulb seals, produce the most watertight compartments available. The black polymer door latches are rivet-less for additional protection. All vertical compartments incorporate nitrogen struts to optimize performance in cold environments.

All DuraMag® bodies are fully powder coated. All lights are factory wired and installed. NEW Swing Door Locking System

Standard Features:
• All Aluminum (6000 Series) Understructure with Extruded Box Tube
• Swing Doors with Nitrogen Props on Vertical Compartments
• Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
• Welded Fender Flares for Superior Strength and Rigidity
• Option Colors Available:
• Black
• Red GM/Dodge Red and Ford Red
• 3/16 – Smooth Aluminum Compartment Tops and Inner Bed Walls
• Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
• Strongest Built Aluminum Service Body in the Industry
• Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
• Black Polymer Rivetless Door Handles
• Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
• Powder Coated – Standard: White
• LED Marker Lights (where required)
• LED Penny Light in Each Compartment
• LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
• Continuous Aluminum Piano Door Hinge
• Pass-through Panel between Front & Center Compartments
• Tread Plate Splash Guards on Front Wall – All Models
• Best 10 Year Warranty in the Industry

DuraMag® Aluminum dump bodies are recognized as Best in Class

The DuraMag Smooth Side Dump Body sports clean lines and a stylish appearance. The double walled sides allow for superior strength without the risk of interior impacts printing through to the outside.

High Performance in Commercial Use

DuraMag® Aluminum Dump Bodies are recognized as Best in Class: Stronger than your typical steel dump body with all the benefits of Aluminum: NO RUST, Eco-friendly, increased payload, better ride, approximately 10% fuel savings.

DuraMag® offers two versions of Dump Bodies to cover all your needs – the HD Smooth Side and Eco.

• HD Smooth – DuraMag’s most common dump body
• Eco – The DuraMag® Eco Dump Body is built for non commercial, lighter duty workloads

Bottom Line: DuraMag builds the bodies that save you money AND make you look good.

From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

• Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
• Push Button locking system with red band locking indicator
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• 8" deep recessed bumper for sure footing when entering bed
• Armless and self supporting tailgate work table
• Adjustable, but lockable, shelving system
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

Nearly half a century of cutting edge engineering has created this Standard Contractor model. But there is nothing standard about it! Our flawless well integrated overall design now comes with optional diamond plate steel or extruded aluminum decks and rear fold-down gates. It’s powder-coated head to toe. WOW!

Standard Features:
• Side loader rack with extra heavy duty 4x2 longitudinal bars that drop down 4-inches, meaning you can easily carry ladders, forms, or scaffolding.
• Top deck mounted boxes, addressing a wide variety of storage needs.
• Gates that fold down in the rear that creates both a work platform and an ease of loading and unloading of equipment into the bed area.
• Dividable deck area between the space between the boxes, for heavy machinery such as compressors or welders, and the rear platform, for bags of concrete or a wheel barrel.
• Stainless steel rear apron mounted between the dock bumper uprights , hiding the unsightly under-deck clutter.

The General Service (GS) Package adds to the capability of the Plus packaging by adding an additional 4-drawer pack. Why not add yet 2 more drawer packs to improve the utility of storage for small components? Or add shelves to take advantage of the extra height? This is Harbor modularity at its best!

The WorkMaster secures the tools of your trade unlike any other enclosed service body. Constructed with steel, built like a vault, the “walk-in” WorkMaster is designed for heavier-duty cutaway vans…and we have been known to mount them on a chassis or two. The WorkMaster is constructed in different lengths and heights to meet your every tool, material storage, and interior height (up to 6’3?) requirement. Need to carry more than your typical van? This is your truck!

• Tightest security system in town, featuring double-bit keys and a Master Lock internal locking system
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• Rear side access door for storage of conduit or other long (10-ft.) materials
• 12" step bumper and side-wall grab handles for ease of entrance into the bed
• Interior ladder storage on hooks mounted along inside shelf Weights up to 300 lbs. lighter than competing brands using FRP
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

Platform bodies promise unyielding quality and reliability. Whether your business is hauling stuff or you’re hauling stuff for business, these platform bodies go the distance!

Standard Features:
• Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8" hardwood apitong deck (apitong deck only available for CA, AZ, and NV customers)
• Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
• Stainless rear apron between the dock bumper uprights to hide unsightly clutter under the bed
• Glossy black coating

Nearly half a century of cutting edge engineering coupled with our obsession to create the perfect contractor body resulted in this design. You told us you want more space. So we created the ComboMaster series which boasts more work and storage space than any comparable contractor body in its class. Want a super-mega version? Ask about our Maxi Combo.

Standard Features:
• 36-inch Rear platform with fold-down 10-inch and two 33"Lx 10"H x 19"D under-deck storage compartments.
• Overcab rack legs attach to the back of the horizontal compartment, giving extra work room on the platform, yet able to store a 15-ft. ladder with ease.
• Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
• Push Button locking system with red band locking indicator
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• 8" deep recessed bumper for sure footing when entering bed
• Adjustable, but lockable, shelving system
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

Options:
• Conduit Boxes
• Rack straps that ratchet to 500 lb. pressure
• Master Lock system
• AOK (All-One-Key) Locking. Makes your ignition key locks everything!
• Hitches that integrate with the bumper brackets
• Spray-On Bedliner
• Vise Brackets and Pipe Holders
• Multiple roll-out drawer packages and slide-out trays
• Light bars, beacons, work lights, and other lighting options
• 110-Volt Electrical Inverters
• Rear Back-Up Alarm

Platform bodies promise unyielding quality and reliability. Whether your business is hauling stuff or you’re hauling stuff for business, these platform bodies go the distance!

Standard Features:
• Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8" hardwood apitong deck (apitong deck only available for CA, AZ, and NV customers)
• Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
• Stainless rear apron between the dock bumper uprights to hide unsightly clutter under the bed
• Glossy black coating

To create the toughest landscape body in the business, start with a Black Boss flatbed. Then add 40” solid-side gates of steel or MDO plywood (see specifics below), swing-away rear gates, and one of the toughest white coatings available. And for the ultimate truck, add a steel floor (smooth or tread plate) and a Rugby dump hoist. Voila! You just created the best Lansdscaper vehicle in the business.

Standard Features:

• Choice of diamond/smooth plate steel deck, aluminum iso-mounted deck, or 7/8”hardwood aptitong deck (aptiton deck only available for CA, AZ, and NV customers)
• Square turret-punched headboard, made of a tough 12 gauge galvanized sheet and 2" x 2" tubular frame
• Stainless rear apron between the dock bumper uprigths to hide unsightly clutter under the bed
• Glossy white coating

The Hillsboro 3000 Series Aluminum Truck Bed adds a new headache rack and fold-down sides with slam latches to a tried-and-true design. This bed carries innovative features like an extruded aluminum floor to make sure your truck stays strong and beautiful after years of heavy use, and we’re so confident in its quality that we back it with a three-year warranty.

Meet the second generation in Hillsboro Industries’ steel truck beds. This model features sides with greasable hinges, slam latches and rubber bump stops for more convenient loading and towing. Plus, this bed uses PPG epoxy primer and polyurethane paint so your truck continues to shine for years to come. You can drive a Hillsboro steel bed with confidence, knowing that it’s backed by an industry-leading two-year warranty.